[DML] Cold start issue resolved

["Nathan Sobieralski" <valleyrat12@xxxxxxxxx>]

For those of you who remember, my car had always had a cold start
problem (cold start injector would not fire). I finally traced this
problem to the wires that go to the TTS. A PO had reversed them so
that the wire that grounds the CSV was instead grounding through the
TTS heating element. This is why the CSV would fire if I grounded the
blue wire directly but not through the TTS. I bought three TTSs before
I stumbled on the solution. Now my car starts with a bump of the
ignition hot and cold.  Yippee!! 

Nathan
2277




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/