RE: [DML] Stock Speakers: (WasTo Cut or Not to Cut)

["John Hervey" <john@xxxxxxxxxxxxxxxx>]

Gary, I put in a set of Kenwood in the front and they fit perfect. The rear
I went with a 8" round and cut holes in the back panel. The normal 6 x 9 or
smaller can be made to work on the side / back, but when you see what you
have to do to fit them you may change your mind. 
I didn't find a speaker that would fit the screw pattern for the back.
Maybe someone on the group did.
John

 

-----Original Message-----
From: dmcnews@xxxxxxxxxxxxxxx [mailto:dmcnews@xxxxxxxxxxxxxxx] On Behalf Of
Gary G
Sent: Saturday, October 28, 2006 10:43 AM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: [DML] Stock Speakers: (WasTo Cut or Not to Cut)

On the subject of radios, I have seen recommendations for speaker 
replacement in the past.  I was wondering if anyone has recently 
replaced their stock speakers with any of the newer ones out there.  I 
know replacements usually require some spacing for the fronts.  Since 
there are a lot of new speakers out there, has anyone recently 
replaced the stock speakers with a brand or model they recommend?  I 
don't want a speaker box and am looking for a set that provides good 
quality to replace the stock ones, and fits relatively well in the 
stock locations front and rear.  Thanks.

Gary G
Vin 3360
New Jersey





To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at
http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links







To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/