[DML] Thermostat Replacement

["thebrave65" <johnny.sawyer@xxxxxxxxx>]

I've been told by many that I don't need to remove the W intake pipe 
to replace the thermostat.  I was able to get the front bolt off of 
the housing, but how does one go about removing the other one under 
the W pipe?

I have the throttle partly removed to get to the back bolt, but my 
little 7/8 wrench just doesn't have the length to reach in there to 
have any torque.

Not enough room in the compartment for a breaker bar either.  The 
water bottle is in the way.

Thanx in advance.

Johnny
5518
AZ-D








To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/