[DML] Adjusting Doors
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[DML] Adjusting Doors
- From: "jedimasterglenn" <jedimasterglenn@xxxxxxxxxxx>
- Date: Fri, 19 May 2006 02:57:53 -0000
Hi,
My driver's side door closes, latches and locks fine, but is difficult
to open. When I pull the handle, the door doesn't budge. It feels
like it's locked. If I put my left hand on the door and push down and
toward the car as I pull the handle with my right hand, it opens
immediately (imagine tracing a vertical line from the front of the
toll booth window, down to the door trim...that's where I put my left
hand).
I had the inner and outer door seals done on both doors (used PJ
grady's larger size seals). The door opened fine before this was
done, so logic says I need to adjust the door somehow...but I'm not
sure where to begin. Any tips anyone?
Thanks!
Glenn
5391
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/dmcnews/
<*> To unsubscribe from this group, send an email to:
dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of PROJECT VIXEN