[DML] Re: Doors....again

[Cliff Schmucker <cliff@xxxxxxxxxxxxxxxxxxx>]

Good advice concerning torsion bar adjustment - I had one that was
over torqued, had delaminated and bent the metal piece that the
torsion plates attach to, twisted the splines on the bars, etc. -
actually had to fabricate a puller in order to remove the plates while
holding with the breaker bar...

anyway, DMC Houston has a very nice replacement for the "valance":
Part # 105721  -  UPR SCREEN RR FINISHER - REPRODUCTION

got one last year to replace one that was beyond hope - $150, looks
and fits perfect

Cliff


On Tue, 16 May 2006 22:33:46 -0000, David wrote:

<snip>
Be very careful removing the valence as they are no longer available.
<snip>





To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/