[DML] Re: Question for people who have cleaned out the valley..

["Matt Spittle" <supermatty@xxxxxxx>]

You could always sandblast/glassbead the area.  That would be one way
to get it spotless.  The first step would be to securely tape up your
intake/spark plug/fuel injector ports, though.  

Matt
#1604

--- In dmcnews@xxxxxxxxxxxxxxx, "Nathan Sobieralski" <valleyrat12@...>
wrote:
>
> How did you guys get it spotless??
> 
> Like an idiot I forgot to completely drain the engine so when I 
> removed the Y pipe a ton of coolant created a lake in the valley 
> mixing with 25 years worth of dirt creating 25 years worth of mud. I 
> got most of it out with paper towels but it is still VERY dirty, Me no 
> like. 
> 
> On another note; I found tons of stuff in the valley. I felt like an 
> archeologist. I unearthed (literally) 10 copper washers, two hex bolts 
> (like the ones that hold the idle speed motor to the manifold), three 
> 11 mm bolts, 3 steel washers, a scrap piece of stainless steel (from 
> the factory no doubt), 3 O rings, not to mention that all the casting 
> crevices were completely filled with dirt. 
> 
> Nathan
> 2277
>









To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/