[DML] Re: Speaker replacement
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[DML] Re: Speaker replacement
- From: "Marv Hein" <marvhein@xxxxxxxxxxx>
- Date: Fri, 28 Apr 2006 23:51:18 -0000
I went into one of these side panels, not to replace speakers, but
to try to get my seat belt retractor working better.
Because I was told I had to cut, I cut. I used a razor knife. I cut
as far out on the edge as possible so the cuts are not visible
unless you remove the inner seal and look hard. I think I slipped
once when the brittle vinyl gave way.
Replacing the inner clips held everything fine without need for
adhesive and replacing the seal covered everything up.
Since you were able to remove without cutting, maybe more patience
on my part and softening things up with heat would have made for an
easier job?
Any advice out there? I probably have to open up the passenger side
soon.
Marv
#10820
AZ-D
--- In dmcnews@xxxxxxxxxxxxxxx, "John Spangler" <johnspangler@...>
wrote:
>
> I recently replaced my rear speakers without cutting anything.
> After pulling off the inner door seal you need to pry off the
barbs
> that hold the seal to the inner door. This will likely tear the
> vinyl a little but they go back where they tore it up so it's ok.
> The rear panels have extra vinyl that is wrapped around the door
> frame. I simply pried up this wrap with a thin screwdriver and
with
> a little patience I had the panel removed without cutting a
thing!
> The first one took about an hour and a half, but the second one
was
> done and refitted in about 45 minutes. Replacing the speaker
takes
> like 5 mins once you're in there, and that's if you keep dropping
> your screwdriver.
>
> Stock radio now sounds significantly less crappy. But still not
> great.
>
> -John
> #5572
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/dmcnews/
<*> To unsubscribe from this group, send an email to:
dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of PROJECT VIXEN