Re: [DML] Cooling Fan Otterstat Wires

[Soma576@xxxxxxx]

Mike,
 
I believe the wires for the otterstat come though the fiberglass wall in  the 
same hole as the impulse coil wiring does (that's the bigger yellow  
connector on the left side under the ignition resistors).  My wiring has  been messed 
with too, but I bet you might find a butt-end connector or a couple  of spades 
together right around there, unless they pulled the wiring for it out  the 
other side, inside the car.  Good thing you are fixing this wiring,  constant 
fans are a bad idea for a number of reasons.
 
Andy
 
 
In a message dated 4/26/2006 5:46:55 P.M. Central Standard Time,  
cambpd@xxxxxxxxx writes:

Hi, does anyone know where the two wires  coming from the cooling  fan 
otterstat switch plug in to?  The  previous owner has the  cooling fans running all 
the time, but I want to  have them controlled by  engine temperature. The 
otterstat is still in  the rear cooling pipe but  all traces of the wiring are 
gone. 



 
Fargo, ND  
1982 DeLorean DMC12 VIN 11596



[Non-text portions of this message have been removed]





To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/