[DML] Re: running rough after tune-up
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[DML] Re: running rough after tune-up
- From: "usndmc" <usndmc@xxxxxxxxx>
- Date: Fri, 14 Apr 2006 03:17:21 -0000
I don't know if you already double checked where you reconnected
your fuel lines to, but one time I had pulled the intake to do some
work and was in a bit of a hurry putting everything back together
and accidentally switched one of the WUR lines with the cold start
valve line. Had the exact same symptoms as you described on a drive
around the block until I came back and discovered my silly error.
Don't mean to be one of those guys that just states the obvious when
you're looking for help, but I figured...just in case. Good luck
with it,
Dave
5968
--- In dmcnews@xxxxxxxxxxxxxxx, "Bill Koenig" <dmc06976@...> wrote:
>
> i just recently did a tune-up on my D - had the fuel injectors
> cleaned, replaced vaccuum hoses, coil, plugs, wires, cap, rotor,
> seals, washers, gaskets, fuel filter, air filter, oil filter, main
> fuel line, etc. when i first started it up it ran okay, but after
it
> would warm up i noticed the idle was really erratic. it would dip
> down to approx 600rpm, then shoot up to 1250 or so. it seems like
the
> engine is on the verge of stalling when that happens. at this
time it
> still drove okay, just the idle was bad. now, the problem is
worse.
> in just 2 days time without driving it a whole lot, it has NO
> acceleration. there is a LOT of hesitation and its basically
> undrivable because of how slowly i accelerate.
>
> i've tried checking for vaccuum leaks with an incense stick with no
> luck - i also tried the propane tank trick that was suggested. i
> haven't been able to find a vaccuum leak, but who knows i might be
> missing something. it seems to me like something may have been
shaken
> loose since it has progressively gotten worse?
>
> any advice for what to check would be much appreciated.
>
> thanks,
> bill
> 6976
>
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/dmcnews/
<*> To unsubscribe from this group, send an email to:
dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of PROJECT VIXEN