[DML] Re: Toby Tabs

["Bernie" <bmanderville@xxxxxxxxxxx>]

Great idea, I'll give it a try once I can manage to get some time to
do it.

Thanks,

Bernie

--- In dmcnews@xxxxxxxxxxxxxxx, "Todd Nelson" <todd1561@xxxx> wrote:
>
> Bernie,
> 
> If you're still having problems getting the TAB out a trick I found
when 
> doing mine was to use a flat-head screw driver and knock all of the
shims 
> out so you have a gap between the trailing arm and the frame.  Then
use a 
> wrench and start to tighten the nut on the TAB.  What this did for
me was 
> actually create a crude press since it started to pull the TAB
through the 
> trailing arm, not much obviously, but just enough to break the
corrosion 
> that held it in.  It still took some muscle to get it out the rest
of the 
> way, but at least it was moving.  Funny enough my passenger side TAB
came 
> out no problem, not sure why that it is.
> 
> Good Luck,
> Todd Nelson
> 1561, Vermont
> http://www.rit.edu/~tan5732
> 
> 
<SNIP>







To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/