[DML] Re: Engine Dies at idle HELP!

["David Teitelbaum" <jtrealty@xxxxxxxxxxxxx>]

If you cannot get the car to idle the fuel mixture is way off. Either
you have a huge vacuum leak and/or the mixture screw is way off. Is
the hole over the mixture screw plugged? If not, that is one of your
vacuum leaks. Check that the air tube for the idle motor is in and
sealed with the "O" ring. On 1 car I did I found the "O" ring and the
brass retainer sliding back and forth on the air tube. Obviously there
was not a good seal and the idle was high and hunting. Check that the
throttle plates are properly adjusted and are closed at idle.
David Teitelbaum
vin 10757




--- In dmcnews@xxxxxxxxxxxxxxx, "blackaddertoo" <blackaddertoo@xxxx>
wrote:
>
> Hi david
> 
>








To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/