[DML] Fuel Filter Replacement
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[DML] Fuel Filter Replacement
- From: "usndmc" <usndmc@xxxxxxxxx>
- Date: Mon, 02 Jan 2006 03:55:40 -0000
I searched the archives but couldn't find anything, so I must be the
only idiot who can't correctly replace a fuel filter. I reconnected
everything but I can't stop a leak from the bottom of the filter
where the rigid line meets the filter. It seeps out through the back
of the nut from the rigid line. I have been easing it this way and
that trying to get the perfect angle with the rigid line, it looks
nice and seated in the filter opening when I start screwing the nut
on. Got the nut fully threaded as far as it would go and it is still
leaking. What is the catch? How do I properly reconnect it so there
is no leak? Back to the garage to try some more while I wait. Thanks
for any help on this, I really need to leave to go back to
Mississippi tomorrow :(
Also, thanks everyone for all the advice on removing the gas tank. I
finally got it out after about an hour of jumping on it from above.
Whoever asked why I was replacing it, it's because something
happened to the old one where it swelled or something, at least the
neck of the hole for the fuel sending unit, and the ring wouldn't
properly screw on. Tried ordering a new ring but had the same
problem. So whenever the tank would be near full and gas would slosh
it would come out the bad seal of the sending unit hole. PO told me
it sat for years and years with gas in it so I think maybe there was
some expansion of the air in the tank from the gas breaking down and
going bad that swelled it? I don't even know if that's possible, but
whatever the reason I have a new tank in now, and one less problem.
Dave
#5968
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/dmcnews/
<*> To unsubscribe from this group, send an email to:
dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of PROJECT VIXEN