Re: [DML] Driver door latch issue
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DML] Driver door latch issue
- From: deloreanernst@xxxxxxx
- Date: Mon, 5 Dec 2005 01:30:45 EST
In a message dated 12/2/2005 10:01:34 P.M. Eastern Standard Time,
derek.grozio@xxxxxxxxxxx writes:
When driving the D on a bumpy road, the
front half of the driver door moves as I go over bumps. By move I mean
jitters like the front half is not latched, probably about 5-6mm of
movement. >>
Perhaps one of the lock rods is disconnected as a work-around to cure a door
that doesn't always lock or unlock properly. You'll see when you
disassemble your door. Compare it to the drawings in the Workshop manual. I've heard of
it being done. Hah! I'm a fine one to offer advice when my own door has
problems...the bellcrank gets hung up so that sometimes the door won't unlock, or
the door bounces back open instead of latching when I close it. I have to
tap the bellcrank with my finger to dislodge it. So, the top half of my door
is always off for access. I just haven't had the time or temperament to remove
the bottom door cover again. Last time I did that it was off until it was at
P. J. Grady for a manifold gasket repair. Too bad the door was behaving then.
Wayne A. Ernst, vin 11174
[Non-text portions of this message have been removed]
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/dmcnews/
<*> To unsubscribe from this group, send an email to:
dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of PROJECT VIXEN