[DML] Re: Battery Ground

["Toby Peterson" <tobyp@xxxxxxxxxxxx>]

Joey - The bolts that are used to attach the trailing arm bolt 
bushing retention plates to the frame have a double nut on them.  
There are welded nuts on the frame that the bolts are screwed into.  
Then, double (or jam) nuts are screwed onto the ends of the bolts to 
make sure they never come out.  The trick is to get the double nuts 
off, because the bolts are long enough that there isn't room for the 
nuts to come off without also loosening the bolts a bit.  Whatever 
you do, don't try to remove the bolts without first removing the jam 
nuts.  The process of getting the remains of the broken bolts out of 
the welded nuts is not pretty.  Contact me offline if you have any 
questions on this.  Toby(at)delorean-parts.com.

Toby Peterson  VIN 2248 "Winged1"
DeLorean Parts Northwest, LLC
www.delorean-parts.com  


--- In dmcnews@xxxxxxxxxxxxxxx, Joey Morgan <jlm1701music@xxxx> 
wrote:
>
I found the ground by the passenger TAB, question is do I have to 
break the bolt?? I have tried spraying it with "deep creep" hoping 
that might help clean it up but it did not help. 








To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/