[DML] Re: Jumping Out of 5th Gear
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[DML] Re: Jumping Out of 5th Gear
- From: "David Teitelbaum" <jtrealty@xxxxxxxxxxxxx>
- Date: Sun, 27 Nov 2005 20:10:25 -0000
For the jumping out of 2nd gear I would suspect a bent or broken roll
pin on the shifter rod again. Before going inside recheck the gear
shift adjustments and the oil level. The jumping out of 5th gear has
nothing to do with the clutch alignment. It is caused by bending the
5th gear shifter fork because you do not get full clutch disengagement
which is caused by the plastic clutch line. Same cause as the
bent/broken pin on the 2nd gear shift rod. BTW some people report that
the transmission shifts better especially when cold by using synthetic
oil in the manual transmission. Maybe you want to try that?
David Teitelbaum
vin 10757
--- In dmcnews@xxxxxxxxxxxxxxx, "dmc_5180" <dmc_5180@xxxx> wrote:
>
> Hi David,
>
> I don't have a problem with 5th gear, but I am starting to have
problem with 2nd gear
> popping out now and then. Although it only seems to happen when the
transmission oil is
> cold right after start up and heading down the road. The senario: I
would start out for a
>
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/dmcnews/
<*> To unsubscribe from this group, send an email to:
dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of PROJECT VIXEN