Re: [DML] Re: Water pump pulley. Or, how do I get the @^#$^% thingoff.

[Martin Gutkowski <martin@xxxxxxxxxxxxxx>]

The original pulley is steel, not aluminium. You remove it by taking the 
back plate off the pump and with the aid of a longish high tensile M10 
bolt threaded into the end of the pump shaft, press the shaft out 
through the pump. You will need a hydraulic press and it'll crack at a 
good couple of tons or more.

Don't try pulling the pulley off.

Martin
DMC Ltd
www.delorean.co.uk





To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/