[DML] I joined the engine pulling club
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[DML] I joined the engine pulling club
- From: Soma576@xxxxxxx
- Date: Sun, 6 Nov 2005 13:08:24 EST
Hey Group,
This weekend was a complete success for VIN 11596. The operation? The goal
of removing the engine and transmission, separating the transmission, and
mounting the engine on an engine stand beginning at 11:30 AM Saturday and
finishing no later then 10am Sunday. And yes, we got 8 hours of sleep in too!
My next project is to remove the exhaust manifolds and replace the studs and
gaskets. After that I plan on replacing the front main crank seal and bead
blasting and painting the timing cover. Then I will remove the oil pan and
replace the gasket and inspect the pump, screen, and other lower crankcase
parts. Next I will clean the engine and spray paint it and reinstall the
manifolds which will be high-temp coated unless I decide to totally replace the
exhaust system. Finally I will replace the heater valve and do some tidying up
on the back of the engine.
As for the transmission, I only need to replace the axle seals and clean and
paint the transmission and powdercoat the tranny mounts.
Many thanks go out to Jim Reeve who came 250 miles to help me (it was a
learning experience for him too!). Jim handled much of the logistics of the
project while I was the muscles and tool expert. Also many thanks to Dave
Swingle, who provided us some late night technical support which was right on the
money and got us through a couple of snags we had little experience in.
Later today or tomorrow I plan on doing a step-by-step write up of the whole
ordeal while it is still fresh in my memory and I will post to the DML.
Hopefully others can learn that it's not really that tough to pull the engine
out as long as you have good tools and some instructions!!
This week also marks my 5th year of DeLorean ownership. How do I know that
I am becoming a DeLorean expert? This was the biggest project I have ever
undertaken - and I didn't have to go buy more tools to complete it!!!!!!!
Andy Lien
Fargo, ND
1982 DeLorean DMC12 VIN 11596
[Non-text portions of this message have been removed]
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/dmcnews/
<*> To unsubscribe from this group, send an email to:
dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of PROJECT VIXEN