Re: [DML] mounting a speed sensor magnet

[Ryan Wright <ryanpwright@xxxxxxxxx>]

On 10/18/05, Owen Emry <owen@xxxxxxxxxxxx> wrote:
> If you've put a magnet/sensor setup on your car, please tell me where you put it!

Hi Owen,

I installed a pair of magnets on my car for my cruise control setup.
They were installed on the driver's side rear half-shaft. At the point
where the shaft mounts to the transmission (I have a 5 speed; no
experience with an automatic), it's much larger and perfectly suited
for a magnet installation. I was able to modify the mounting bracket
that came with the sensor to mount into an existing bolt hole on the
transmission.

I've got a rough picture here: http://www.ryanwright.com/delorean/ccs100/10.jpg

It's not much, I know, but it was the best I could do without a lift.
A few months ago I had the transmission out of the car. I took
detailed closeups of the sensor & magnet mounting while it was out but
I seem to have lost the photos.

--
- Ryan
http://www.memfrag.com - Memory Fragment Search & Storage


To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/