[DML] Re: Turn Signal/Clock

["David Teitelbaum" <jtrealty@xxxxxxxxxxxxx>]

When I check bulbs I remove it and "flick" it with a finger. Watch the
filiments. If one end wiggles around it can make contact and work for
a while. Hard to describe, easy to demonstrate. Annoying when it
happens and gives you intermittant problems. Testing IS important
though. Very hard to visually inspect electrical equipment.
David Teitelbaum
vin 10757




--- In dmcnews@xxxxxxxxxxxxxxx, "Toby Peterson" <tobyp@xxxx> wrote:
> Hi Gang - Relative to this thread on turn signal light behavior, I 
> just had an interesting situation with Winged1.  I started getting 
> the "fast flash" on the right hand turn indicator, which suggested 
> that one of the bulbs had gone bad, or one of the sockets had 
> 






To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/