Re: [DML] Hard start problem
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DML] Hard start problem
- From: Chris Almy <chris.almy@xxxxxxxxxxx>
- Date: Wed, 28 Sep 2005 12:54:08 -0700
Jeremiah,
Don't worry, I have no intention of replacing expensive fuel components
without testing them first. I wanted to see what possible causes were to
help with my troubleshooting this. After reading a few posts, I went over
the vacuum connections and checked the power connection on the warm-up
regulator. While I cleaned the power connector in the past, I didn't do a
good job because upon closer inspection the connections were very corroded.
Now the car cold starts perfectly! I won't know if it's completely fixed
until the I let the car sit for a few more days and try starting it again.
However, my hot start is still not working too well. So I've ordered the
Bosch fuel tester. I'm curious as to what it's going to show. I've already
replaced all the major components that typically cause hot starts issues
(including the O-rings in the PPR). If the fuel pressures check out, it
looks like I may need to get the mixture slightly adjusted.
Thanks for the tips,
Chris
VIN 4099
At 11:41 PM 9/25/2005 -0700, you wrote:
>Ok. This is where owning the Bosch K-Jetronic Fuel
>Pressure System and a dwellmeter comes in VERY handy.
>One owner recently said (paraphrased) - "I don't know
>why people bend big money on random parts, but won't
>spend $25.99 on a dwellmeter, and $59.99 on the Bosch
>Fuel Pressure Gauges". I completely agree on this. I
>used to throw hundred of dollars at random parts, but
>wouldn't take the time to buy those two tools. Heh,
>how times have changed now....
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/dmcnews/
<*> To unsubscribe from this group, send an email to:
dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of PROJECT VIXEN