Re: [DML] removing engine and trans
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DML] removing engine and trans
- From: Soma576@xxxxxxx
- Date: Thu, 15 Sep 2005 11:02:47 -0400
John,
Well for sure I want to replace the oil pan gasket, front main seal,
timing cover gasket, and anything else that is hard to get to with the
engine in the car. My passenger side exhaust manifold gasket is
leaking which is what prompted me to want to pull the motor. I'd also
like to replace motor mounts, and bead blast and paint the motor. As
far as deeper work, the last time I did a compression test one of my
cylinders was about 20 psi below the others, so I would like to find
out why that is.
Andy
-----Original Message-----
From: John Hervey <john@xxxxxxxxxxxxxxxx>
To: dmcnews@xxxxxxxxxxxxxxx
Sent: Tue, 13 Sep 2005 11:17:30 -0500
Subject: RE: [DML] removing engine and trans
Andy, It's a job and we do it in the shop both way's. What's wrong
with the
engine that it has to be pulled or are you just wanting to clean it up
with
everything out.
John Hervey
-----Original Message-----
From: dmcnews@xxxxxxxxxxxxxxx [mailto:dmcnews@xxxxxxxxxxxxxxx] On
Behalf Of
Soma576@xxxxxxx
Sent: Tuesday, September 13, 2005 9:38 AM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: [DML] removing engine and trans
Hello Group,
Anyway, I am planning on pulling my engine and trans this fall/winter
for at the minimum some exhaust work and general cleaning, and perhaps
if I feel up to it, some deeper engine work.
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see
www.dmcnews.com
To search the archives or view files, log in at
http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/dmcnews/
<*> To unsubscribe from this group, send an email to:
dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of PROJECT VIXEN