RE: [DML] distributor cap and rotor

["John Hervey" <john@xxxxxxxxxxxxxxxx>]

Jeff, You know I have the complete fuel system washer kit for $12.95.
John\



-----Original Message-----
From: dmcnews@xxxxxxxxxxxxxxx [mailto:dmcnews@xxxxxxxxxxxxxxx] On Behalf Of
Jeff Friday
Sent: Monday, September 12, 2005 8:26 PM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: Re: [DML] distributor cap and rotor

I'll have to try that next time.  I figured the lines were too tight but it 
makes sense and would save on the washer cost.  I always just take the lines

off because it's easier for me and I usually will do other things i might 
think off while the Mix Unit is off.

Replacing the copper washers is the only cost you may want to save because 
if you have to take them off again if you don't do something right they have

to be replaced (again.)

Definitely buy that workshop manual!

Jeff in NC


[moderator snip]





To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/