[DML] Re: Separating fuel lines

["David Teitelbaum" <jtrealty@xxxxxxxxxxx>]

What you need to do now is to hold back on the metal lines and twist
the flexible lines back and forth to break them loose at the
compression ferrule. Don't go crazy here, they should come loose
easily by just turning the lines a little, back and forth. You can
also tap with a hammer on the side a little, again, don't get crazy
with the hammer!
David Teitelbaum
vin 10757


--- In dmcnews@xxxxxxxxxxxxxxx, "cruznmd" <racuti1@xxxx> wrote:
> The archive search engine isn't the best. I know this question has 
> been asked but I can't find the answer.
> 
> I'm replacing the flexible lines from the fuel pump to the metal lines.
> The line nuts unscrewed without any trouble. The metal fittings in the 
> flexible hoses will not separate from the tips of the metal lines.
> 






To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/