RE: [DML] O Rings

["Joseph Kuchan" <josephkuchan@xxxxxxxxxxx>]

The traditional treatment for o-rings is silicone grease but use a wipe of 
motor oil on the intake o-rings because they are upstream from your lambda 
probe.

-Joe Kuchan

>From: "sweetp01569" <paul.sweet@xxxxxxxxxxxx>
>Reply-To: dmcnews@xxxxxxxxxxxxxxx
>To: dmcnews@xxxxxxxxxxxxxxx
>Subject: [DML] O Rings
>Date: Thu, 04 Aug 2005 13:12:07 -0000
>
>I plan to change plugs, wires, rotor, cap, vacuum hoses, along with
>the two small coolant hoses behind the waterpump in a few weeks.  I
>have the intake manifold O-rings/gaskets.  Are there other O-rings or
>gaskets to be replaced when I do this job?  Also, do I use anything as
>a sealant on the O-rings, or just a finger wipe with oil?
>
>Thanks,
>
>Paul






To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/