RE: [DML] High idle
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [DML] High idle
- From: "rob" <rob@xxxxxxxxxxx>
- Date: Tue, 26 Jul 2005 16:41:01 -0400
Derek,
It sounds like a bad idle ICU module. First make sure the idle regulator
valve is free and test continuity between the blk/ylw and blk/slate wires on
the ICU wire connector (The one towards the Pass. side). If it's an open
ciruit then the thermal switch or wire connection is at fault. If the
regulator, switch and wiring check out you're back to a bad ICU.
Rob Grady
-----Original Message-----
From: dmcnews@xxxxxxxxxxxxxxx [mailto:dmcnews@xxxxxxxxxxxxxxx] On Behalf Of
Derek
Sent: Tuesday, July 26, 2005 10:10 AM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: [DML] High idle
Right now my car, when started, idles at about 1800 and slowly creeps
upwards of 2000.
Once the car is warmed up by driving for a few minutes, the idle sits steady
at 2500. Don't
know if it matters, but the car is a 5 speed. Does anybody have any idea
what could be
causing this? Thanks!
-Derek
#10084
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/dmcnews/
<*> To unsubscribe from this group, send an email to:
dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of PROJECT VIXEN