Re: [DML] Needed Badly: Button Clip for the Mode Switch

["Joe OBrien" <joeyoseppijoe@xxxxxxxxx>]

Well I already have three of Grady's HCR mode switch diaphrams that 
are pre lubed/oiled. I'm redoing the mode switches on all three 
cars, all are original.

I used petroleum jelly on them before, but it still likes to dry out 
after awhile, or the jelly will block off a vent setting, and I hate 
tearing the console apart for that damn mode switch. So I decided to 
do it right with three of the better mode switch diaphrams.

The mode switch in 16851 is being replaced just to make sure it 
isn't a factor in my problem with the vent controls. Other two for 
preventative maintenance. I have two spare mode switches, just that 
the switch in 16851 and my spares all have the damn button clip 
broken, missing 1 tab. Seems the P.O. of these clips forced them in 
the wrong way.

The other two cars are fine, and I told myself I would never rob 
from another car to make another one work, so I am still holding 
myself to that one. I'd rather just buy the correct part and have it 
done the right way.

So, if anyone still has a spare button clip, I would desperatley 
like to buy it from you!!


-Joe O'Brien

2524,
16634,
16851








To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/