RE: [DML] Oops!!!!

["John Hervey" <john@xxxxxxxxxxxxxxxx>]

Robert,
It's difficult with a large wrench. An impact will normally do it but trying
to get it in there is another problem. If all the belts are on, spray a
small amount of brake fluid on them to help keep them from slipping and push
down, then try the wrench again.
John



-----Original Message-----
From: dmcnews@xxxxxxxxxxxxxxx [mailto:dmcnews@xxxxxxxxxxxxxxx]On Behalf
Of Robert Lingo
Sent: Sunday, June 26, 2005 9:29 PM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: Re: [DML] Oops!!!!


I was wondering if anyone would tell me the easiest way to get the nut off
of the crackshaft pully.  It just spins around and around when I try to
loosen it.  Also, do I turn it counterclockwise to loosen it?  Thanks yall.






To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/