[DML] Re: High Idle
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[DML] Re: High Idle
- From: "David Teitelbaum" <jtrealty@xxxxxxxxxxx>
- Date: Wed, 15 Jun 2005 18:23:22 -0000
Check the throttle cable. It may have been pulled out of the ferrule
on the support by the throttle spool. Make sure the throttle arm is
going all the way back and tripping the idle micro.
David Teitelbaum
vin 10757
--- In dmcnews@xxxxxxxxxxxxxxx, DMC Erik <dmcerik@xxxx> wrote:
> Hi,
> I've put about 50 miles on my car since my restoration. Once thing
that is bugging me is it idles around 1500 now. Before the restore it
didn't do that. I replaced the WUR while doing the restore because I
thought that was the cause of my lack of power when cold. It seems to
have fixed that issue. so the car idles now at 1500RPM. and
sometimes even higher, but then goes back down to 1500. Any ideas?
>
> Erik
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/dmcnews/
<*> To unsubscribe from this group, send an email to:
dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of PROJECT VIXEN