Re: [DML] Cold start need help
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DML] Cold start need help
- From: Warren Wallingford <warren@xxxxxxxxxx>
- Date: Tue, 14 Jun 2005 16:14:14 -0500
Perhaps the female contacts inside the plug are spread or pushed up some
into the boot. The TTS grounds to the body of the waterpump, which
grounds to the engine. That circuit is hard to troubleshoot because
ground is everywhere. The only other thing is if you used teflon tape
on the threads, that might insulate the TTS from ground. Very strange.
Warren at DMC
Palatinus, Joe wrote:
> Ok, So I have a had a bad cold start problem for a while that hs gotten worse. THe battery is great, and the starter cranks like a champ (just replaced both starter and solenoid) but it will not turn over unless I ground one of the wires to the thermal time switch. (If I ground one of the wires the starter seems deactivated, and if I ground the other one it starts right up, no problem, but I must unplug the thermal time switch and ground that lead to start the car every day. I just replaced the thermal time switch thinking obviously this would fix the problem, but it didn't, I still have to ground one lead to start cold, or else I am cranking forever. Any suggestions?
> Joe P.
> VIN 17167 6808
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
> To address comments privately to the moderating team, please address:
> moderators@xxxxxxxxxxx
>
> For more info on the list, tech articles, cars for sale see www.dmcnews.com
>
> To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews
> Yahoo! Groups Links
>
>
>
>
>
>
>
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/dmcnews/
<*> To unsubscribe from this group, send an email to:
dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of PROJECT VIXEN