AW: [DML] Extended convex mirrors
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
AW: [DML] Extended convex mirrors
- From: "Elvis Nocita" <elvisnocita@xxxxxx>
- Date: Sun, 12 Jun 2005 15:27:31 +0200
Hey Guys,
I installed the new mirrors today and I am very pleased with the result.
It took me about 2 hours including searching for the correct tools.
Tom - great job !
But I made it a bit differently than you. I took the complete mirror
off of the car before messing with the glass or scratching the SS.
Before pulling out the wires I attached another wire to it so I didn't
have to use the stiff wire. I pulled the wires in and out very easily and
fast.
I am not sure if it makes any sense to attach the heating pads at all,
but I installed the wires - just in case... (maybe somebody makes a little
module to activate the heating 30 seconds after starting the car and turn it
off
after 2-3 minutes...?!?)
Without the heating stuff the whole job can be done in about an hour - with
experience even faster.
A heat gun is a bit too hot for my taste, a regular hairdryer works, too.
And it won't melt the plastic.
Before putting the door trims back on make sure, that the mirror-motors
work.
Those connectors are prone to do their jobs sometimes...or not...
As a positive side effect my passenger mirror doesn't vibrate anymore since
I
reinstalled the plastic guides correctly.
To get the the plastic cover off I pushed it out from the side where the
harness
exits the housing. Much better as the plastic won't be scratched.
I would say this was a fast and easy job, maybe also one of the best
investment
for my car, too.
I still have to test them in real traffic and on the Autobahn, but so far -
great !
Elvis & 6548...no more elephants hidden in the blind spots !
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/dmcnews/
<*> To unsubscribe from this group, send an email to:
dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of PROJECT VIXEN