RE: [DML] Feedback through CB when engine is running.

["John Hervey" <john@xxxxxxxxxxxxxxxx>]

RF is Radio Frequency, It goes through the air.
John Hervey



-----Original Message-----
From: dmcnews@xxxxxxxxxxxxxxx [mailto:dmcnews@xxxxxxxxxxxxxxx]On Behalf
Of PRC1216@xxxxxxx
Sent: Friday, June 10, 2005 9:14 PM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: Re: [DML] Feedback through CB when engine is running.


Thanks for the advice, John and Al.   I will give Al's advice a shot.   I
think I still might go through the battery directly though, I'd be afraid
that
going through the fan circuit breaker would give me fan noise in the CB.
I'll
try both, and I will use the thicker gauge wire.   I'm not sure if there is
a
good ground around the fuse box area like you mentioned.   Any suggestions
there?   And I will try grounding the antenna to the engine block and see
how
that turns out.   Anyone else have other tips to try?

-Patrick C.
1880


[Non-text portions of this message have been removed]





To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at
http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links












To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/