RE: [DML] Re: Upper door seals

["John Hervey" <john@xxxxxxxxxxxxxxxx>]

Be sure you buy aluminum because of rust.
john Hervey


-----Original Message-----
From: dmcnews@xxxxxxxxxxxxxxx [mailto:dmcnews@xxxxxxxxxxxxxxx]On Behalf
Of David Teitelbaum
Sent: Thursday, June 09, 2005 9:46 PM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: [DML] Re: Upper door seals


They are not special Delorean rivets. Any rivet of the correct size
and length will do. Just be careful drilling out the old ones. You can
cut a piece of tubing to slip over the drill so when you do drill
through the rivet you do not go in too far and damage the S/S skin. I
would also cover the torsion bar so you don't accidently scratch it.
Another way is to use a small chisel and cut the head off the rivet.
David Teitelbaum
vin 10757


--- In dmcnews@xxxxxxxxxxxxxxx, stefan diklich <stefandmc@xxxx> wrote:
> Do you have to order rivits from a parts dealer or can u pick them
up anywhere?
>
>
>







To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at
http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links












To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/