[DML] Re: How to install steering knuckle?

["David Teitelbaum" <jtrealty@xxxxxxxxxxx>]

I have to assume you are referring to the short shaft with the 2
u-joints on it that connects the steering column with the rack. You
have to remove the bolts in the u-joints so they can slide up and
down. Once installed you put the bolts back in and tighten them up.
You have to line up the steering wheel to the straight-ahead position
with the wheels straight. You might have to clean the splines up so
everything slides easily.
David Teitelbaum
vin 10757


--- In dmcnews@xxxxxxxxxxxxxxx, "dmcerik" <dmcerik@xxxx> wrote:
> Ok, the new rack is in...the steering column is in...how do I get that 
> steering knuckle to go onto the rack?  I have it connected to the 
> steering column, but I can't get it to connect down below.  Is there a 
> method to get this thing on?
> 
> Thanks for the help,
> Erik
> 04512






To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/