[DML] Re: VIN: 2953 Doors

["conundrum1984" <vin02953@xxxxxxxxxxxx>]

How is the torsion bar adjusted?  I'm only going to do it when it is 
warm outside (75+).  If possible, I'm only going to adjust it a 
little at a time so I don't over-do it.  Is it hard to do?  And could 
I do it alone?  I'm new to all this.

--- In dmcnews@xxxxxxxxxxxxxxx, "John Hervey" <john@xxxx> wrote:
> 
> Just to make sure you didn't get a bad strut, did you swap out with 
the
> other one to confirm it isn't bad before you adjust.
> John Hervey
> www.specialtauto.com
> 
> -----Original Message-----
> From: dmcnews@xxxxxxxxxxxxxxx [mailto:dmcnews@xxxxxxxxxxxxxxx]On 
Behalf
> Of rodney rael
> Sent: Monday, April 18, 2005 9:15 PM
> To: dmcnews@xxxxxxxxxxxxxxx
> Subject: Re: [DML] VIN: 2953 Doors
> 
> Conundrum:
> 
> I had same problem.   It is your torsion bars, and it was discussed 
at
> length like one month ago.   Go to Google.com and do an advanced
> search picking only DMC news and put torsion bar.
> 
> Good luck!..
> 
> Rodney
> 3300
> 
> On 4/18/05, conundrum1984 <vin02953@xxxx> wrote:
> >
> >
> > I just placed new gas strust on my doors that I purchased from DMC
> > Houston.  They work fine and hold up "ok" when I push the door 
all the
> > way up.  The driver's door goes most of the way up then I got to 
push
> > it a little to go the rest of the way.






To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/