[DML] Re: Fuel guage problem

["Harold McElraft" <hmcelraft@xxxxxxx>]

Something is wrong with the sender.

Harold McElraft - 3354


--- In dmcnews@xxxxxxxxxxxxxxx, "stainlessilusion" <5n-@xxxx> wrote:
> 
> 
> I took out the harness that goes from the connector in the washer 
box
> to the fans, horns fuel etc. and removed the wrap. Found that the
> ground going from the main connector to the ground cluster was all
> kinds of melted, must be another PO thing...Anyway I replaced the
> whole wire and cleaned everything up, re-wrapped the wire and
> reinstalled. NOW my situation....The fuel guage works finally BUT,
> with the sender empty and float all the way down- the guage goes 
past
> the 0 mark and stops at my pin; and the orange/yellow warning light
> doesnt come on. When I turn the unit upside down so the float is 
all
> the way at the top; the guage only reads a little over 3/4 a tank. 
I
> have DMCH's senging unit, is this still wiring or could it be that 
the
> unit is just defective? Thanks for all the past and future help!
> -----Dani B. #5003
> 
> 
[moderator snip]





To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/