RE: [DML] Fw: door lift cylinders

["Videobob Moseley" <videobob@xxxxxxxxxxx>]

Here,
check out this video of my doors and you will see what I am talking about.
It is a cool 52 outside...

http://www.bttfstuff.com/MOV05225.MPG

>From: Soma576@xxxxxxx
>Reply-To: dmcnews@xxxxxxxxxxxxxxx
>To: dmcnews@xxxxxxxxxxxxxxx
>Subject: RE: [DML] Fw: door lift cylinders
>Date: Thu, 24 Feb 2005 16:25:35 -0500
>
>
>
><<<If anyone is interested, I can make a video showing how the doors open 
>with
>these
>shocks and you can tell me if it is normal or not.
>
>- VB>>>>>
>
>VideoBob,
>
>Are you sure your torsion bars aren't overtightened a notch or two?  If you 
>remove the piston from the door and let the door hang, it should only have 
>a couple inches of space from being closed.  If you have much more than 
>that, the bars are too tight.  It's likely a previous owner may have 
>cranked them up one because the struts were about dead and this way they 
>opened better!
>
>Andy
>
>
>
>
>
>To address comments privately to the moderating team, please address:
>moderators@xxxxxxxxxxx
>
>For more info on the list, tech articles, cars for sale see www.dmcnews.com
>
>To search the archives or view files, log in at 
>http://groups.yahoo.com/group/dmcnews
>Yahoo! Groups Links
>
>
>
>
>
>
>







To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/