Re: [DML] Re: Speedo Angle Drive Removal

[Josh Haldeman <jhaldeman@xxxxxxxx>]

It shouldn't be this hard.  On all the parts cars, the hardest part was 
removing the nut from the hub.  Once it was off, I just placed the nut 
into a bench vice, and used a nail tap and a hammer to punch the angle 
drive out...tapping from the inside of the nut.  Always popped right 
out.  I've even done mine this way a few times.  Never had any trouble, 
after figuring that out.

Good Luck Mike!

-Josh



Joe OBrien wrote:

>
>I've lerned the hard way that the only way that retaining ring will 
>let go is if you hack the angle drive in half and salvage the nut.
>
>Or just buy a new nut from a Vendor. In one instance helping someone 
>I managed to rip pff the nut from the retaining ring with my bare 
>hands, just once.
>
>
>Joe OBrien
>
[moderator snip]





To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/