[DML] Re: Engine cranks but no start

["spaceboy_2912" <seanmm@xxxxxxxxxx>]

Firstly, don't run the starter for more than a few seconds at a 
time. You will destroy the starter if you stay on it for extended 
periods of time. Secondly you need to ensure that you are getting 
both spark and fuel at the cylinder.  After attempting to start one 
or two times remove the air filter assembly and push on the pressure 
plate. If there is resistance then you should have fuel to the 
distributor at least. If the plate just pushes down without any 
resistance then no fuel is getting to the distributor and of course 
not getting to the injector. If you find that the plate offers no 
pressure that's another thread. If the plate does offer pressure, 
you may wish to test the ignition system to ensure you are getting 
spark. I am assuming that you have fuel in the system.
Sean









To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/