RE: [DML] Cold Start Valve - how long does it go?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [DML] Cold Start Valve - how long does it go?
- From: "John Hervey" <john@xxxxxxxxxxxxxxxx>
- Date: Mon, 14 Feb 2005 16:17:04 -0600
If your car doesn't start quickly and your cranking continues, then the cold
start will spray fuel for 7 to 8 seconds if you stay on the key. The TTS
switch will heat up and should shut it off in 7 to 8 seconds. That's what it
does if everything is good. If it's longer than that I would replaced the
TTS switch. If you keep cranking on the engine you will normally flood the
car.
John Hervey
www.specialTauto.com
-----Original Message-----
From: gzapf [mailto:x86Daddy@xxxxxxxxxxxxx]
Sent: Monday, February 14, 2005 2:47 PM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: [DML] Cold Start Valve - how long does it go?
How long is the Cold Start valve supposed to shoot fuel? Is it a
second, or something more like 15 seconds?
My PO installed a momentary button to activate the Cold Start valve,
but I think they were doing so to compensate for another warm-up
problem... not because the activation based on the thermo-time switch
was deficient... As it stands, in order to cold start, I have to
manually tap this button periodically during the first 10-20 seconds
after start-up, otherwise it dies. If I attach the original
electrical connector to the cold start valve, the engine still starts,
but sputters out within a few seconds. Is there a way to test if this
is the warm up regulator or something?
Thanks,
--Greg
#2894
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at
http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/dmcnews/
<*> To unsubscribe from this group, send an email to:
dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of PROJECT VIXEN