RE: [DML] Proto 1 Looking for flap sander

["Gary Hull" <Specialty@xxxxxxxxxxx>]

My DeLorean dealer original ARO unit is marked
Model# 8067E1S   Serial# 4845F81   RPM 1000

The "S" on the Model# was struck harder and the 1000 on the RPM looks like
it was struck over the number 4500.

My guess would be that the "S" was for special, and the slower RPM was what
was Special.

I wonder if the F81 in the Serial# indicated February 1981.

The 1 1/2" wide, 12 brush "Wolfhead" sanding head was made by: 
"Grinding & Polishing Machy. Corp. Indianapolis Indiana U.S.A"
Mine is SER. H 5195.

You can purchase "essentially" the same sanding head, shaft adapter, and
replacement sandpaper from them now. 

They go by the name G&P Machinery, and the unit can be seen at:
http://www.gandpmachinery.com/wolf2.html.  Click on More Information and go
to the bottom of the page to see the 12-brush unit.

Members of the Pacific Northwest DeLorean Club www.PNDC.org can see and use
the unit at one of the tech Sessions held at my house, but as mentioned
earlier, the 80-Grit it came with is VERY aggressive, and should probably
only be used for re-graining damaged areas.

Gary
IN2TIME






To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/