[DML] Re: ERRATIC AUTO TRANS

["sweitzel_2000" <sweitzel@xxxxxxxxxx>]

I would recheck your gov boards again. I had to re-work the 2 boards
on mine three times because i kept making stupid mistakes like
accidentally bridging some of the tiny solder traces together and not
noticing. Also, when you rebuilt your GC, did you replace the TIP-42C
transistors and add .01uf filter caps per Mark Hershey's article?
http://www.dmcnews.com/Techsection/transputer3.htm

also, check to make sure the cable didn't fall onto the exhaust
manifld and melt through the insulation.

-sean


--- In dmcnews@xxxxxxxxxxxxxxx, "delor_01" <JOHN.JORDAN@xxxx> wrote:
> 
> 
> 
> 
> I have an auto trans that starts out in second gear--stays there for 
> about 10 or 15 min then will shift into 3rd.  once it shifts it will 
> work ok until I stop for 2 or 3 hours.  Then it goes back to second 
> gear for 10 or 15 minutes.
> 
> I have a rebuilt computer gov in the car.   any suggestions?
> 
> re:  John








To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/