Re: [DML] DeLorean Hood Needed

["Bruce Benson" <delornut@xxxxxxxxxxxx>]

It's possible, depending on the extent of the damage, to cut out a section
of the fiberglass under the hood to access the damaged area of stainless. If
the section is cut carefully with a dremel tool or die grinder using a
cutoff wheel the removed section can be glassed back in place and painted
after the stainless has been repaired. .

Bruce Benson


> I'm assuming that what I've read before still stands as true(?):
> That the black structural support attached to the underside of the
> hood is forever fused to the stainless, and that any dents that
> occur opposite the black support are impossible to fix.  Correct me
> if that's wrong.  Naturally, 95% of what happened last night is
> along the edges, opposite the black support beams.
>
> Thanks a lot,
> -Derek L
> VIN 5302






To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/