[DML] Re: DCS 2006 Engine rebuild contest

["Jim Reeve" <dmc6960@xxxxxxxxx>]

The electics are easy if there are spare harnesses/computers to work
with.  It would get more difficult if the harnesses needed to be made.  

If each engine has its own wiring harness, I can rig up an easily
connectable, transportable, box to run the PRV if I can get a spare
main harness, idle/lambda/ignition computers, and the couplers used to
connect the main/engine harnesses together.

Other simple parts needed would be a battery and coil. I have a spare
instrument cluster that can be connected.  Fuel delivery would be
simple.  Coolant/radiator wouldn't be necessary since the engines
would not be run for very long. Sure would be loud though if your not
putting any exhaust on it. 

Jim Reeve
DMC6960

--- In dmcnews@xxxxxxxxxxxxxxx, kKoncelik@xxxx wrote:
> 
> WE do plan to run the motors 
> I have talked to a few of the vendors and the bigger problem is
finding the electronics in a package that we can just wire up to the
motors to fire it over
> The engine is simple its the hook up electrically that presents the
problem 
> Hookup is easy just the Electronics
> Jim Reeves or others any ideas 
> Test stand is no problem
> 
> Ken








To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/