[DML] Questions Re: B280 / Chrysler 3.0 Intake Manifolds

["content22207" <brobertson@xxxxxxxxxxxx>]

In lieu of hard to find Volvo A series intake manifolds:

I studied a B280 in a junkyard once. Intake manifold seemed modifiable
as follows:
- plug injector ports
- seal a plate across the rear
- plane a flat surface above central air passage
- drill some venturi and stud holes 

Does anyone know if Chrysler 3.0 intake manifolds are identical to
B280? If so, could someone with a Chrysler model verify that it is
indeed modifiable as above? Valley width is identical to B28, and
mounting holes are in the same location, so it should bolt up OK. I
believe ports are different sizes, but as long as they are not larger
than B28 O rings that shouldn't be a problem.

This could be a source of intake manifolds for owners wanting to
experiment with carburetion.

Bill Robertson
#5939













To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/