RE: [DML] Ignition switch

["K. Creason" <dmc4687@xxxx>]

There is a spring inside the electronic section that pushes back on the
mechanical section. I have never disassembled the electronic section.
Another possibility is that the mechanical section is full of gunk, metal
shavings, etc, and might need to be cleaned out. That is not too difficult,
but disassembly is the best way to clean it and the re-assembly is the hard
part.
-Kevin


-----Original Message-----
From: S E Ableman [mailto:s.ableman@xxxx]
Sent: Friday, November 28, 2003 1:21 PM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: [DML] Ignition switch


List,

My ignition switch does not spring back to run position. Is there a
fix other than replacing the entire switch?

Thanks ,
Steve



To address comments privately to the moderating team, please address:
moderators@xxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at
http://groups.yahoo.com/group/dmcnews

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/