Re: Missing hose?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Missing hose?
- From: "Dave Swingle" <swingle@xxxx>
- Date: Mon, 03 Nov 2003 02:22:49 -0000
Hose connection sounds normal. That's about what it looks like. There
should be about 1/4" of plastic nipple there. You're about a day late
on the photo - I just put the engine back in the car I was working
on. Now I can't see that valve any more.
The line you are looking for is actually a hard black plastic line
that enters the engine compartment from the side pontoon on the
drivers side. It follows that steel tube that crosses the back of the
engine compartment. There is about an inch of rubber hose on the end
that connects to the control valve.
Last time I needed those copper washers in a hurry I got them at a
Volvo dealer. John Hervey sells a really nice assortment very
reasonably - essentially every copper ring on the car.
Dave
--- In dmcnews@xxxxxxxxxxxxxxx, doctorDHD@xxxx wrote:
>... I was told I could reuse the copper gaskets that were on the
> fuel distributor when I took it off. That supposes that you don't
drop them when taking them off! Well, I dropped two but hey no problem
right? I just called an auto parts store and they said sure we have them. Two
hours and four stores later no one had them, .....
Back to the Home of PROJECT VIXEN