Re: Automatic transmission shifts fine but ignores the 2 and 1 positions

["David Teitelbaum" <jtrealty@xxxx>]

Get out your Workshop Manual and got to G:06:02 fig 17. I am guessing
somehow the manual control valve is not connected to the shift
linkage. You will have to drop the pan to see this.
David Teitelbaum
vin 10757



--- In dmcnews@xxxxxxxxxxxxxxx, "a56lincoln" <a56lincoln@xxxx> wrote:
> My automatic transmission shifts fine (first, second, third) in D 
> position but ignores shifter positions 1 and 2 (acts like it's still 
> in D Also, my backup lights stay on in Park. The shifter does not 
> seem to be misaligned. In other words, P R N D 2 1 all seem to be 
> aligned correctly with the shifter. I can't find anything in the 
> manuals about such a problem.
> 
> What am I missing? Any suggestions would be appreciated.