Re: Climate control and auto shifter lights on all the time

["Harold McElraft" <hmcelraft@xxxx>]

There have been numerous postings about this in the past. The 
simplest way to get just resisted night lighting with lights on is 
to get a SPST relay from radio shack and install it in place of the 
relay you mention. You then have no lighting at the AC panel when 
the lights are off and resisted lighting with lights on. I never 
notice the lights out during the day and I feel better about having 
lower heat behind the panel now.

The auto trans shifter light is not in the circuit with the AC 
panel. If you want to dim that one you have to figure out an inline 
resistor set up. I have been toying with a way to do it that gives 
me full illumination during the day and resisted with lights on but 
it is just a thought right now.

Harold McElraft - 3354


--- In dmcnews@xxxxxxxxxxxxxxx, jordan rubin <nuttenschleuder@xxxx> 
wrote:
> Hello all:
> 
> Ive got the little diagram that shows removing the
> top third from the left relay and running a wire from
> A to B.
> 
> Some say to use a 10ohm/10 watt resistor between the
> two. 
> Some say it doesnt matter.
> 
> what does anyone in the group think about this.
> 
> 
> thanx
> 
> Jordan 11613
> 
> __________________________________
> Do you Yahoo!?
> Yahoo! SiteBuilder - Free, easy-to-use web site design software
> http://sitebuilder.yahoo.com