RE: [DML] fuel gage pegged straight up

[jwit6@xxxx]

To check your guage, values should be as follows. When empty the sender gives 0 Ohms, and when full it gives 100 Ohms with 90 Ohms being equivalent to the 4/4 mark on the fuel gauge. Connect your sender wires together and turn on the ign. The guage should show empty.
Jim 
6147

"painintheass7565" <advantics@xxxx> wrote:

>My fuel gage is pegged full all the time. I changed the fuel sender 
>but got the same results. The new sending unit is metal doesn't 
>appear to have an opening to let fuel in the way the old plastic one 
>did. Does anyone know how it works?
>
>John Salva
>Vin 1383 & 5326