[DML] Re: Warm-up problems (spark advance solenoid)

["content22207" <brobertson@xxxx>]

Pull hose off spark advance diaphragm (attached to side of
distributor) and feel for vacuum at idle. If it's there, something's
wrong. Could be cut off solenoid or idle microswitch.

Bill Robertson
#5939

>--- In dmcnews@xxxxxxxxxxxxxxx, billsfanmd@xxxx wrote:
> I hear people talk about the spark advance solenoid located by the 
> distributor...Looks like alittle flying saucer :-) Is there a way to
check to 
> see if it is bad? mine has the vaccum lines on it and the electrical
plug but 
> just wondered the failure rate and symptoms? This does not seem to
be a part 
> you would normally replace on a tune-up.
> 
> Mike C
> 2109
> 
> 
> [Non-text portions of this message have been removed]